2016-2022 | Colorado/Canyon Chevy/GMC Duramax Kit | 2.8L Duramax | EGR DEF DPF Kit with GDP MVPI2/MVPI3 Tuner, Ez lynk or Efi live. FLOPRO/JAMO OR P1 RACE PARTS SENT FOR THE EXHAUST SYSTEMS.*This will take 4 to 8 business days to receive everything.
INCLUDES
- GDP Single Tune ECM Flash, 0 OR 60 HP Tune Of Your Choice) ECM will be flashed with HP Tuner that will be sent to you with instruction sheet.
- Ez Lynk tuner comes with 50/60 and 70HP tunes and lifetime support pack. Will only need your SMARTPHONE.
- Efi Live tuner comes with a single tune or multi tune from 0 to 90HP (YOU WILL NEED TO BE ABLE TO DO A STOCK READ AND SEND THAT TO US IN PDF FORMAT)
- Flo Pro 3 inch Turbo Back Single System. (No lead time).
- Optional EGR Kit Available through the drop down menus, (EGR KITS ARE VERY VERY HARD TO INSTALL, FOR MOST PEOPLE IT IS BETTER TO JUST UNPLUG THE EGR AND NOT BUY THE EGR KIT)
COMPUTER WITH INTERNET REQUIRED FOR THE GDP MVPI2/MVPI3 TUNING.
SMARTPHONE REQUIRED FOR THE EZ LYNK TUNING.LAPTOP REQUIRED WITH EFI LIVE TUNING.Our kit is the solution for problem DPF/DEF and EGR issues. It will electronically disable the EGR.
You can add the EGR removal kit but must be mechanically experienced to install.
It also does NOT require DEF fluid, exhaust filters or sensors in the exhaust system.
The tune achieves a broad gain over the torque curve, increased fuel mileage and most of all reliability and peace of mind driving your Duramax.
What our 2.8L Duramax kit offers
2.9-5.5 MPG increases (depending on driving and road conditions)**
-Gains up to 90 HP and 175 ft-lbs of torque.**
-Full removal of DPF Unit, DEF fluid is no longer required, no trouble lights.
Custom tuning changes includes
- Fuel mileage increase. Customers are seeing 2.9 MPG-5.5 MPG increase!
- Increase torque/performance curve.
- Better warm up performance.
- Accelerator pedal effort corrections.
- Uphill driving adjustments made to hold gear longer.
- Eliminated high pressure pump noise.
- Glow plugs indicator will be displayed only when glow plugs are operating.
- Improved range to fan control for better cooling and run after shutting off the truck to help proper cool down.
- Earlier activation controls to coolant temp while driving to keep engine and oil cooler.
*This is custom tuning and is not returnable and not refundable and also cannot be cancelled once order is placed.
Installation Steps
Living up to the brand name, EZ LYNK has made the installation process simple. We’ve broken down each step and provided some valuable information that will help you understand how your AutoAgent works.
- Step One: Download & Install the AutoAgent App
- The AutoAgent app is available for most smart devices. It requires iOS 8+ or Android 5+ to operate. You can download the iOs app here and the Android app here.
- Step Two: Create an Account
- From the AutoAgent app, select ‘create an account’. You will need to verify that your email address is valid upon creation. Dealers should always create an account for the end-user or use the account that the end-user has already created.
- Step Three: Place Your Key in the ‘Run’ Position
- Turn your key all the way over without starting the vehicle. This will boot your vehicle’s engine computer allowing the AutoAgent to communicate with it. If you have a push-to-start vehicle, you should press the Start button twice.
- Step Four: Plug the AutoAgent into your OBD-II Port
- With the key in the ‘Run’ position, plug your AutoAgent into your vehicle’s On-Board Diagnostics port. You can verify that it has booted correctly when you see that a blue and green light are illuminating from the device.
- Step Five: Connect to your AutoAgent from your Smart Device
- Navigate to the WiFi settings of your smart device and select the ‘EZLYNK_####’ network. A check mark will appear next to the network name when you have successfully connected. The AutoAgent 2 also allows you to connect via Bluetooth.
- Step Six: Open the AutoAgent App
- After you’ve successfully connected, you can navigate back to the AutoAgent app. You should now be able to see your vehicle gauges.
- Step Seven: Lynk your Vehicle
- When you purchase from Explosive Diesels or an authorized dealer, your vehicle will be AutoLynked. If your smart device has cellular data, you will notice that a message has appeared asking you to lynk the vehicle. Follow these prompts to connect your vehicle with your mechanic/technician. If your smart device does not have cellular data, you will need to connect to an internet available network and re-open the app to complete the lynking process.
- Step Eight: Program Your Vehicle
- After completing the lynking steps you are ready to flash your vehicle.
Navigate to > Vehicle > ECU Profiles. Here you can view the list of tunes or ECU profiles that are available to you.
Tap the button to download your desired ECU profile, followed by the ‘Install’ button to flash your vehicle. The app will guide you through the flashing procedure.
- (When using a smart devices without cellular data you will need to switch to an internet available network to download the ECU profile, then back to the EZ LYNK network to install the ECU profile.)